- Contact Person : Mr. JI Jim
- Company Name : Opwill Technologies (Beijing) Co., Ltd.
- Tel : 86-010-82771386-828
- Fax : 86-010-82771782
- Address : Beijing,Beijing,Room 415,Digital Media Building,No.7 Shangdi Inoformation Road,Haidian District,Beijing,PRC,10085
- Country/Region : China
- Zip : 100085
Related Product Searches:Gigabit Ethernet Test Set,High Quality,GE tester, gigabit ethernet TESTER,OTP6200
Overviews:
OTM2601/2602 gigabit Ethernet test module is one of OPWILL’s modular test products. It is designed for Ethernet network deployment and comprehensive test. OTM2601/2602 fully meets Ethernet standard, offering complete Ethernet test functionalities with reliable, simple and flexible qualities. It is an efficient test tool for verifying SLAs.
Throughput, frame loss, latency and back-to-back measurements as per RFC2544Packet jitter measurement as per RFC3393 for assessing IP packet-delay variationEthernet BERT testAllowing stream-generation according to VLAN ID/priority, Q in Q and TOS/DSCP configurationsFeature-rich stream statistics, error analysis and alarm indicationFeatures
RFC2544 standard test Single-port loopback test and dual-port test; Throughput, frame loss, latency and back-to-back test. Packet-jitter measurement RFC3393 standard-compliant for testing IP packet delay variations. Service disruption time test Stream generation Maximum support 8 different streams. The parameters of streams can be configured:acket size, burst/continuous send mode, source/destination MAC, source and destination IP, VLAN ID/ priority, QinQ, TOS/DSCP, source/destination port of UDP/TCP, payload. | Stream analysis Error analysis; Various alarm indications: LOS, Link Error, etc; Feature-rich statistics: Multicast, Broadcast, Unicast, Pause Frame statistics function; Ethernet frame analysis; Allowing stream statistics according to different filter conditions, which can be configured to be source/destination MAC, source and destination IP, VLAN ID/priority, QinQ, TOS/DSCP, source/destination port of UDP/TCP or their combinations. Bit error test Ethernet BERT test; Manual alarm and error generation. |
OTM2600 SPECIFICATIONS
SPECIFICATIONS | ||||||
Optical interface |
| 1000Base-SX | 1000Base-LX | 1000Base-ZX | ||
Wavelength (nm) | 850 | 1310 | 1550 | |||
Tx level (dBm) | -9 to -3 | -9.5 to -3 | 0 to +5 | |||
Rx level sensitivity (dBm) | -22 | -22 | -22 | |||
Maximum reach | 550m | 10 km | 80 km | |||
Transmission bit rate (Gbit/s) | 1.25 | 1.25 | 1.25 | |||
Reception bit rate (Gbit/s) | 1.25 | 1.25 | 1.25 | |||
Tx operational wavelength range (nm) | 830 to 860 | 1270 to 1360 | 1540 to 1570 | |||
Measurement accuracy | Frequency (ppm) | <0.1 | <0.1 | <0.1 | ||
Optical power (dB) | <0.5 | <0.5 | <0.5 | |||
Transceiver type | SFP | SFP | SFP | |||
Electrical interface | Duplex mode:full/half duplex | Compliance:10/100/1000 BASE-T | ||||
Connector :RJ-45 | Maximum reach:100m | |||||
PHYSICAL SPECIFICATIONS | ||||||
Temperature | Operating:-10°C to 50°C;Storing:-40°C to 70°C | |||||
Relative humidity | 0% to 95%(non-condensing) | |||||
Size (H×W×D) | 25 mm x 97 mm x 259 mm | |||||
Weight | 0.4kg |
Gigabit Ethernet Test Set